
Wear Resistance Self-Adhesive Ceramic Pulley Lagging Sheet
Diamond Shaped Ceramic Pulley Lagging, Rubber Sheet,Diamond Shaped Ceramic Pulley Lagging Rubber Sheet, Pulley Lagging For Belt Conveyor Drum
Belt conveyor ceramic rubber pulley lagging
Basic Info
Model NO.: JR428
Usage: Industrial, Flooring, Printing
Raw Materials: SBR,NBR, EPDM, Cr
Performance: Anti-Slip
Size: Thickness 1-100mm*Width1-3m*Length1-20m
Elongation: 200-300%
Tensile Strength: 3-8MPa
Interlayer: 1 Lay,2lay,3lay ,etc
Working Temperature: -30-120 Centigrade
Trademark: JIURUN
Origin: Hebei, China
Material: SBR Mostly
Feature: Wear-resistant, Impact-resistant, Heat-resistant, Corrosion-resistant, Insulating, Cold-resistant, Chemical Resistant
Medium: Pure Gum Rubber Sheet and Fabric
Color: Black or as Customized
Density: 1.5-1.7g/cm3
Hardness: 65+/- 5 Shore a
Surface: Both Sides Smooth or One Side Smooth The Other Fab
Insertion: Cotton Plyester Ep Nylon Woven Cloth
Free Sample: Available
Specification: Thickness 1-100 *Width 1-3 *Length1-20m
HS Code: 40082100
Description:
Coefficient of friction between conveyor belt and pulley is a very important factor in determining the performance of a conveyor belt on a drive.
Low coefficient of friction may cause conveyor belt slippage and lead to more wear of the belt and belt tracking problem.
Rubber pulley lagging can reduce slippage and extend service life of conveyor belt.
Belt Conveyor Ceramic Pulley Lagging
Technical parameters:
1. High-wearable Al2O3 ceramic tiles, into special rubber. With the specification 20mm× 20mm
2. Aluminum Oxide content: ≥ 92 %.
3. Bonding CN Layer
4. Ceramic Hardness: Mohs hardness 9
5. Working temperature: ≤ 85 ° C
6. Rubber Hardness: 60± 5 Shore A
7. Tensile strength: 150Kg/m²
8. Ceramic surface shape: Plane, convexity
9. To suit for pulleys performing in the most difficult conditions.
10. To install through cold bonding on the jobsite.
Ceramic Rubber Pulley Lagging Sheet Technical Data:
Material | NR ,SBR, etc. |
Hardness | 65 shore a or as request |
Abrasion loss | 100mm3 |
Overall thickness | 8mm,10mm,12mm,15mm,20mm,etc |
Length | 10m, 20m, 30m, etc |
Pulley lagging rubber sheet in different dimensions and colors are all available.
Conveyor Diamond Cold Rubber Pulley Lagging Sheet
Description:
Ceramic pulley lagging rubber sheet is essential to improve conveyor belt performance.
Ceramic lagging is used to reduce belt slippage, improve tracking and extend life of belt, bearing and other components.
Ceramic Pulley Lagging is specially suited for pulleys where slippage and excessive wear and tear problems make normal rubber lagging ineffective. The ceramic tiles help in proper grip of the belt under wet, muddy or any other such arduous conditions.
High Tensile Property Pulley Lagging Rubber Sheet
1.Aluminum Oxide:95%.
2.Ceramic Hardness(Mohs) >9t
3.Working temperature:≤85 centigrade
4.Rubber Hardness: 60±5 Shore A
5.Tensile strength:15 MPa
6.With cn bonding layer or as request.
Installation of ceramic pulley lagging
Ceramic pulley lagging is suitable for pulleys performing in the most difficult conditions.
It can be installed through cold vulcanization process on site or at pulley manufacturer.
FAQ
Q: Are you a trading company or manufacturer ?
A: We are a manufacturer that have about 20 years production experience.
Q: Can i get a sample for testing ? How do it charged ?
A: Yes, sample is free of charge, but we don't bear the Express costs.
Q: Do you provide guarantee of your products during a certain time?
A: Yes, all our products provides guarantees according to industry standards.
Q: Do you have foreign experience for your products?
A: Yes, all the products we manufactured have exported to USA, France,Australia,Russia,UK, etc.