Specializing in the production of conveyor belts.

To provide customers with more conveyor accessories and services in the conveyor system.

Home > News > Content
Optimization And Improvement Of The Belt Conveyer Belt
- Feb 28, 2018 -

  In the case of materials need to be classified or fractional, we can consider the selection of the baffle conveyor belt, which has brought great convenience to this kind of transportation. In order to increase the bearing capacity of the belt conveyor belt, the lateral bending deformation of the belt conveyor belt is minimum after loading. That is to say, improving the lateral rigidity of the belt conveyor belt is the key to reduce the lateral bearing deformation and increase the bearing capacity of the belt body.

        The lateral rigidity value of the belt body of the belt conveyor is the ratio of the bending weight and the width of the belt body due to the self weight of the belt conveyor belt in the transverse vertical section of the belt body. The high lateral stiffness of the conveyor belt of the transverse rigidity value standard is not greater than 0.05, the conveyor belt with optimal structure improvement, adding lateral rigidity enhanced layer after the lateral rigidity detection value of 0.036, with a body bearing after the lateral deformation is reduced, the bearing capacity of up to 15% ~ 20%.

       To improve the large heavy-duty conveyor belt transverse rigidity is the effective measures to set up special polyester short fiber composite layer with special mixing and rolling in the multilayer flat body baseband tensile body canvas layer, namely polyester staple fiber in the adhesive along the transverse direction of the belt body single arrangement of buried layer.

        The use of the special compound rubber layer which has enhanced lateral bending capacity of the belt conveyor belt enables the lateral rigidity value of the belt body to increase 2.5 times than that of the conventional structure, even though the lateral rigidity value of the belt body is increased from 0.09 to 0.036.

All of these are upgrading on the conveyor belt. The service life of the conveyor belt can be improved by the operator's use of the conveyor belt. The operation of the conveyor belt will greatly consume the service life of the conveyor belt.