Specializing in the production of conveyor belts.

To provide customers with more conveyor accessories and services in the conveyor system.

Home > News > Content
Important Factors Needing Attention In The Belt Hot Vulcanization Joint Adhesive
- Sep 25, 2018 -

3 Key elements Conveyor belt hot vulcanization joint adhesive

endless belt.jpg

Conveyor belt hot vulcanization joint adhesive 

As the name implies is used for conveying heat curing joint treatment of related adhesive. In general, mainly includes the conveyor belt hot vulcanization joint core, conveyor belt hot vulcanization Joint surface adhesive and conveyor belt hot vulcanization joint mortar. The three cooperate with the heat curing machine to complete the belt heat curing joint treatment.


1. Conveyor belt hot vulcanization joint core glue, 

Conveyer belt hot vulcanization rubber cushion. Heat curing joint treatment, used to lay in the middle of the fabric with fabric core or filled with the steel wire rope core in the upper and lower parts, to enhance the belt joint after the impact of the joint site, increase the bonding strength of the joint site.


2. Conveyor belt hot vulcanization Joint surface adhesive, 

Hot vulcanization cover glue. Heat curing joint treatment, used to lay in the joints of the conveyor belt joint parts, to ensure the integrity of the entire belt after the joint, to enhance the tensile wear resistance of the conveyor belt.


3. Conveyor belt hot vulcanization joint glue, 


Mainly used for conveyor belt, core and adhesive between the surface of the bonding process, the adhesive properties of the glue, directly related to the belt joint after the adhesion of continuous force. Relatively high-quality joint slurry adhesive treatment of the joint of the conveyor belt joints will be stronger adhesion, the joints are more prone to degumming phenomenon occurs.

After understanding the conveyor belt hot vulcanization joint adhesive is what, then to see the belt 


4. heat vulcanization Joint adhesive choice 


In general, the construction personnel in the belt heat vulcanization Joint adhesive choice, to choose as far as possible with the belt itself material closer to the joint material is appropriate. That is to say, if the construction conveyor belt is neoprene material, the construction personnel must choose Chloroprene rubber to carry on the best adhesion.


Of course, in order to facilitate the selection of construction personnel, there are many general-purpose section of the joint adhesive, a variety of materials under the joint treatment can be used, no need to judge a variety of conveyor materials.