Specializing in the production of conveyor belts.

To provide customers with more conveyor accessories and services in the conveyor system.

Home > News > Content
2NOS Endless Belt Export To Abu Dhabi Seaport, UAE
- Dec 07, 2017 -

Introduction:

Conveyor belt is a kind of compound products which compounded rubber,fiber and metal or plastic and fabric together,it plays the roler of carrying and transporting material in the belt conveyor belt.

 

The conveyor belt is widely used in cement,coking,metallurgy,chemical industry,iron and steel industry,and the transportation distance is shorter,smaller troughput applications.

 

The conveyor belt can continuous,high efficiency,and large inclination conveying.The conveyor belt is easy to use,easy to repair,low freight rates,and can shorten the transport distance,reduce project cost,saving manpower and material resources.

 

Application:

Our rubber conveyor belt is suitablefor middle long distance,and applied mall and medium - sized lump material,granules material,and powdery material,coal,ore stone or ther product under high load,speed,impact and heavy wear,agglomerate product,cement chamotte and other high temperature powder in metallurgy,coking,constructional material and casting industries.

 

Base information for nylon conveyor belt

 

Width

200-3000mm

Thickness

5-30mm

Tensile strength (Mpa)

10-24Mpa

Material

Nylon , nature rubber

Production standard

GB/T10822-2003

Ends of belts

Open and Endless

type

"V" Shape, Chevron Shape, Diamond Shape

Usage

Transportation for Mining, architectural industry, port, etc

Transportation material

Suitable for middle and long distance conveying of materials such as coal, ore stone or other product under high load, speed, impact and heavy wear

 

Feature

good elasticity, anti-impact, High adhesion, good flexing capacity, Good trough ability, Higher strength,Good abrasion resistance, Good biological corrosion resistance

 

 

 

Technology data for nylon conveyor belt

 

 

Fabric

Fabric structure

Fabric type

Fabric thickness (mm/P)

Belt’s whole tensile strength

Cover rubber

thickness

Width

(mm)

Polyester

(EP)

Warp

weft

2ply

3ply

4ply

5ply

6ply

Top

(mm)

Bottom

(mm)

Polyester

NN 66

EP100

0.85

200

300

400

500

600

0-18

0-10

100-2200

EP125

0.9

250

375

500

625

750

EP150

1.00

300

450

600

750

900

EP200

1.10

400

600

800

1000

1200

EP250

1.15

500

750

1000

1250

1500

EP300

1.25

600

900

1200

1500

1800

EP350

1.35

700

1050

1400

1750

2100

EP400

1.45

800

1200

1600

2000

EP500

1.55

1000

1500

2000

2500

 

 

DIN

22102

Tensile strength

 

Elongation

Abrasion

Application of conveyor belt 

Mpa

Kgf/cm2

%

mm3≤

Z

15

150

400

200

Abrasion resistant. Suitable for bulk and lumpy material under normal working conditions.

N

17

170

450

180

Abrasion resistant. Suitable for bulk and lumpy material under normal working conditions.

Y

20

200

450

120

Abrasion resistant. Suitable for heavy lump materials under normal working condition

W

18

180

450

90

Abrasion resistant. Suitable for heavy lump materials under normal working condition

X

25

250

450

120

Abrasion resistant. Suitable for heavy lump materials under normal working condition

MOR

15

150

400

250

Moderatly oil resistant. Suitable for material consisting of animal fat or vegetable oil.

T2

15

150

350

180

Suitable for carrying hot loads continuously at temperature up to 150℃

T3

10

100

300

250

Suitable for carrying hot loads continuously at temperature up to 180℃

 



  1. All conveyer belts must be ring-shaped to be used in actual use, so the joint of the conveyer belt is a crucial part of the preparation. The good or bad of the joint directly affects the service life of the conveyer belt and the smooth and smooth operation of the conveyer line.

  2. The methods of connecting the joints are: mechanical joints, cold bonding joints, hot vulcanization joints and so on. Mechanical joints generally refer to the use of belt buckle connectors. This joint method is convenient, fast and economical, but the efficiency of joints is low, and it is easy to damage, which has certain influence on the service life of conveyor belts. In the PVC and PVG whole core Flame-retardant and antistatic belt joints, this kind of joint method is used in the products of 8 grade or below. Cold adhesive joints, that is, the use of cold adhesive adhesives to carry out the joint. The joint approach than mechanical joints for high efficiency, more economic, should be able to have a good connection effect, but from a practical point of view, because the technology is relatively rare to grasp, impact and adhesive on the quality of the joint is very large, so it is not very stable. The thermal vulcanization joint is proved to be the most ideal joint method. It can ensure high joint efficiency, and is also very stable. The service life of the joint is also very long, and it is easy to master. But there are many disadvantages, such as technical trouble, high cost, long operation time and so on.