General Specs of conveyor belts: 1. Tensile strength: 10-20Mpa. 2. Width: 300mm-2400mm 3. Thickness: 6mm-30mm 4.Number of layers: 2-10ply Features of Chevron Patterned conveyor belt Can carry loose materials at angle of 17-18 and bagged material at 30-35 Cleat angle and pitch are designed for...
Features of Chevron Patterned conveyor belt Can carry loose materials at angle of 17-18 and bagged material at 30-35 Cleat angle and pitch are designed for smooth travel over return idlers Cleats and the top cover rubber are mono block molding for strength v-shape chevron patterned conveyor belt are used primarily when the angle of incline becomes too steep for a smooth conventional conveyor belt. The belt is fitted with integrally moulded cleats which prevent the material from sliding backwards as would be the case with a smooth surface belt. Different cleat designs allow the carrying of many types of material, from bulk solids to unit loads. Application: There are open type and closed type, suitable for bulk or bagged materials such as powder and granule with incline less than 45 C. Technical Data of Rubber Cover: Tensile Strength: ≥10Mpa Elongation at Break: ≥350% Adhesive strength between carcass: ≥6.0N/mm Adhesive strength between cover and carcass: ≥3.0N/mm Elasticity: ≥32% Abrasion: ≤200mm3
Tensile Strength Elongation at break WEAR rate
MPa % ≥ mm3 ≤ 18 400 100 24 450 120 15 350 200
steel cord conveyor belt Features:
high tensile strength, low extensibility, small used transmission pulley diameter, uniform steel wire rope tension, excellent troughbility and good adhesive between rubber and steel wire.
Applicable environment: The belt realizes conveying a large amount of materials at long distance and at high speed in the fields of coal, mine, ports, metallurgy, electric power, chemical engineering, etc.
Technical parameters: The steel cord conveying belt has the general used, high abrasion, cold-resistant and flame-retardant according to the using requirement and the performance of the cover rubber.